[ad_1]
Packet Tracer – Abilities Integration Problem (Teacher Model)
Teacher Observe: Pink font colour or grey highlights point out textual content that seems within the teacher copy solely.
Topology
Addressing Desk
Background
This exercise permits you to apply a wide range of expertise together with configuring VLANs, PPP with CHAP, static and default routing, utilizing IPv4 and IPv6. Because of the sheer variety of graded components, you possibly can click on Examine Outcomes and Evaluation Objects to see if you happen to appropriately entered a graded command. Use the cisco and sophistication passwords to entry privileged EXEC modes of the CLI for routers and switches.
Necessities
Addressing
The addressing scheme makes use of the 192.168.1.0/24 tackle house. Further tackle house is accessible between VLAN 15 and VLAN 1. VLAN 25 wants sufficient addresses for 50 hosts. Decide the subnet and full the subnet desk beneath.
Full the Addressing Desk by assigning the next addresses to VLAN 25:
R2 G0/0.25 – First IPv4 tackle
PC25 – 2nd IPv4 tackle
L25 – Final IPv4 tackle
Configure IPv4 addressing on the mandatory finish units.
On R2, create and apply IPv4 and IPv6 addressing to the G0/0.25 subinterface.
VLANs
On S1, create VLAN 86 and identify it BlackHole.
Configure S1 ports in static mode with the next necessities:
F0/1 is the native trunk for VLAN 99.
F0/7 – F0/18 as entry ports in VLAN 15.
F0/19 – F0/24 as entry ports in VLAN 25.
G0/1 – 2 and F0/2 – F0/6 are unused. They need to be correctly secured and assigned to the BlackHole VLAN.
On R2, configure inter-VLAN routing. VLAN 99 is the native VLAN.
PPP
Configure R1 and R2 to make use of PPP with CHAP for the shared hyperlink. The password for CHAP is cisco.
Routing
On R1, configure IPv4 and IPv6 default routes utilizing the suitable exit interface.
On R2, configure an IPv6 default route utilizing the suitable exit interface.
Configure IPv4 OSPF utilizing the next necessities:
Use course of ID 1.
Routers R1 and R2 are in space 0.
R1 makes use of router ID 1.1.1.1.
R2 makes use of router ID 2.2.2.2.
Promote particular subnets.
On R1, propagate the IPv4 default route created.
Configure IPv6 OSPF utilizing the next necessities:
Use course of ID 1.
Routers R1 and R2 are in space 0.
Configure OSPF on applicable interfaces on R1 and R2.
R1 makes use of router ID 1.1.1.1.
R2 makes use of router ID 2.2.2.2.
Connectivity
All units ought to have the ability to ping the online server.
Scripts
Configure PC25 and L25 with IPv4 Addressing
Router R1
allow config t ipv6 unicast-routing username R2 password 0 cisco interface Serial0/0/0 encapsulation ppp ppp authentication chap ipv6 ospf 1 space 0 router ospf 1 community 10.1.1.0 0.0.0.3 space 0 default-information originate router-id 1.1.1.1 ipv6 router ospf 1 router-id 1.1.1.1 ip route 0.0.0.0 0.0.0.0 Serial0/0/1 ipv6 route ::/0 Serial0/0/1 finish copy running-config startup-config
Router R2
allow config t ipv6 unicast-routing username R1 password 0 cisco int g0/0 no shut interface GigabitEthernet0/0.1 encapsulation dot1Q 1 ip add 192.168.1.193 255.255.255.224 ipv6 ospf 1 space 0 interface GigabitEthernet0/0.15 encapsulation dot1Q 15 ip add 192.168.1.1 255.255.255.128 ipv6 ospf 1 space 0 interface GigabitEthernet0/0.25 encapsulation dot1Q 25 ip tackle 192.168.1.129 255.255.255.192 ipv6 tackle FE80::2 link-local ipv6 tackle 2001:DB8:A:25::1/64 ipv6 ospf 1 space 0 interface GigabitEthernet0/0.99 encapsulation dot1Q 99 native ip add 192.168.1.225 255.255.255.224 ipv6 ospf 1 space 0 interface Serial0/0/0 encapsulation ppp ppp authentication chap ipv6 ospf 1 space 0 router ospf 1 router-id 2.2.2.2 community 192.168.1.0 0.0.0.127 space 0 community 192.168.1.128 0.0.0.63 space 0 community 192.168.1.192 0.0.0.31 space 0 community 192.168.1.224 0.0.0.31 space 0 community 10.1.1.0 0.0.0.3 space 0 ipv6 router ospf 1 router-id 2.2.2.2 ipv6 route ::/0 Serial0/0/0 finish copy running-config startup-config
Change S1
en conf t vlan 86 identify BlackHole exit interface FastEthernet0/1 switchport trunk native vlan 99 switchport mode trunk interface vary Gig0/1 - 2 , FastEthernet0/2 - 6 switchport entry vlan 86 switchport mode entry shutdown interface vary FastEthernet0/7 - 18 switchport entry vlan 15 switchport mode entry interface vary FastEthernet0/19 - 24 switchport entry vlan 25 switchport mode entry finish copy running-config startup-config
[sociallocker id=”54558″]
[/sociallocker]
[ad_2]