[ad_1]
7.2.4.9 Packet Tracer – Configuring IPv6 Addressing (Teacher Model)
Topology
7.2.4.9 Packet Tracer – Configuring IPv6 Addressing
Addressing Desk
| Gadget | Interface | IPv6 Tackle/Prefix | Default Gateway |
|---|---|---|---|
| R1 | G0/0 | 2001:DB8:1:1::1/64 | N/A |
| G0/1 | 2001:DB8:1:2::1/64 | N/A | |
| S0/0/0 | 2001:DB8:1:A001::2/64 | N/A | |
| Hyperlink-local | FE80::1 | N/A | |
| Gross sales | NIC | 2001:DB8:1:1::2/64 | FE80::1 |
| Billing | NIC | 2001:DB8:1:1::3/64 | FE80::1 |
| Accounting | NIC | 2001:DB8:1:1::4/64 | FE80::1 |
| Design | NIC | 2001:DB8:1:2::2/64 | FE80::1 |
| Engineering | NIC | 2001:DB8:1:2::3/64 | FE80::1 |
| CAD | NIC | 2001:DB8:1:2::4/64 | FE80::1 |
Goals
Half 1: Configure IPv6 Addressing on the Router
Half 2: Configure IPv6 Addressing on Servers
Half 3: Configure IPv6 Addressing on Shoppers
Half 4: Check and Confirm Community Connectivity
Background
On this exercise, you’ll observe configuring IPv6 addresses on a router, servers, and purchasers. Additionally, you will observe verifying your IPv6 addressing implementation.
Half 1: Configure IPv6 Addressing on the Router
Step 1: Allow the router to ahead IPv6 packets./
a. Enter the ipv6 unicast-routing world configuration command. This command should be configured to allow the router to ahead IPv6 packets. This command might be mentioned in a later semester.
R1(config)# ipv6 unicast-routing
Step 2: Configure IPv6 addressing on GigabitEthernet0/0.
a. Click on R1 after which the CLI tab. Press Enter.
b. Enter privileged EXEC mode.
c. Enter the instructions essential to transition to interface configuration mode for GigabitEthernet0/0.
d. Configure the IPv6 deal with with the next command:
R1(config-if)# ipv6 deal with 2001:DB8:1:1::1/64
e. Configure the link-local IPv6 deal with with the next command:
R1(config-if)# ipv6 deal with FE80::1 link-local
f. Activate the interface.
Step 3: Configure IPv6 addressing on GigabitEthernet0/1.
a. Enter the instructions essential to transition to interface configuration mode for GigabitEthernet0/1.
b. Discuss with the Addressing Desk to acquire the right IPv6 deal with.
c. Configure the IPv6 deal with, the link-local deal with and activate the interface.
Step 4: Configure IPv6 addressing on Serial0/0/0.
a. Enter the instructions essential to transition to interface configuration mode for Serial0/0/0.
b. Discuss with the Addressing Desk to acquire the right IPv6 deal with.
c. Configure the IPv6 deal with, the link-local and activate the interface.
Half 2: Configure IPv6 Addressing on the Servers
Step 1: Configure IPv6 addressing on the Accounting Server.
a. Click on Accounting and click on the Desktop tab > IP Configuration.
b. Set the IPv6 Tackle to 2001:DB8:1:1::4 with a prefix of /64.
c. Set the IPv6 Gateway to the link-local deal with, FE80::1.
Step 2: Configure IPv6 addressing on the CAD Server.
Repeat Steps 1a to 1c for the CAD server. Discuss with the Addressing Desk for the IPv6 deal with.
Half 3: Configure IPv6 Addressing on the Shoppers
Step 1: Configure IPv6 addressing on the Gross sales and Billing Shoppers.
a. Click on Billing after which choose the Desktop tab adopted by IP Configuration.
b. Set the IPv6 Tackle to 2001:DB8:1:1::3 with a prefix of /64.
c. Set the IPv6 Gateway to the link-local deal with, FE80::1.
d. Repeat Steps 1a by 1c for Gross sales. Discuss with the Addressing Desk for the IPv6 deal with.
Step 2: Configure IPv6 Addressing on the Engineering and Design Shoppers.
a. Click on Engineering after which choose the Desktop tab adopted by IP Configuration.
b. Set the IPv6 Tackle to 2001:DB8:1:2::3 with a prefix of /64.
c. Set the IPv6 Gateway to the link-local deal with, FE80::1.
d. Repeat Steps 1a by 1c for Design. Discuss with the Addressing Desk for the IPv6 deal with.
Half 4: Check and Confirm Community Connectivity
Step 1: Open the server internet pages from the purchasers.
a. Click on Gross sales and click on the Desktop tab. Shut the IP Configuration window, if vital.
b. Click on Net Browser. Enter 2001:DB8:1:1::4 within the URL field and click on Go. The Accounting web site ought to seem.
c. Enter 2001:DB8:1:2::4 within the URL field and click on Go. The CAD web site ought to seem.
d. Repeat steps 1a by 1d for the remainder of the purchasers.
Step 2: Ping the ISP.
a. Open any shopper pc configuration window by clicking the icon.
b. Click on the Desktop tab > Command Immediate.
c. Check connectivity to the ISP by getting into the next command:
PC> ping 2001:DB8:1:A001::1
d. Repeat the ping command with different purchasers till full connectivity is verified.
Obtain PDF & PKA file:
[sociallocker id=”54558″]
[/sociallocker]
[ad_2]
