Instructions for Fixing Errors: Bosch Dishwasher E25 Error Reset

Introduction

Bosch dishwashers are known for their reliability and efficiency. However, like any other appliance, they can develop faults over time. One of the most common errors that Bosch dishwasher owners encounter is the E25 error. This error is usually caused by a blockage in the dishwasher’s drain system. In this article, we will provide you with step-by-step instructions on how to fix the E25 error on your Bosch dishwasher.

What is the E25 Error?

The E25 error on a Bosch dishwasher indicates that there is a blockage in the drain system. This blockage can be caused by food particles, grease, or other debris that has accumulated in the dishwasher’s drain pump or hose. When the dishwasher detects a blockage, it will stop working and display the E25 error code on the control panel.

Step 1: Turn off the Power

Before you start working on your Bosch dishwasher, you need to turn off the power to the appliance. This will ensure that you do not accidentally electrocute yourself while working on the dishwasher. To turn off the power, locate the circuit breaker that controls the dishwasher and switch it off.

Step 2: Remove the Filter

The next step is to remove the filter from the dishwasher. The filter is usually located at the bottom of the dishwasher and can be easily removed by twisting it counterclockwise. Once you have removed the filter, clean it thoroughly with warm water and soap. Make sure that you remove any food particles or debris that may be stuck in the filter.

Step 3: Check the Drain Pump

After cleaning the filter, you need to check the drain pump for any blockages. The drain pump is located at the bottom of the dishwasher and can be accessed by removing the cover. Once you have removed the cover, check the drain pump for any debris or blockages. If you find any blockages, remove them carefully using a pair of pliers or tweezers.

Step 4: Check the Drain Hose

If the drain pump is not blocked, the next step is to check the drain hose for any blockages. The drain hose is usually located at the back of the dishwasher and can be accessed by removing the back panel. Once you have removed the back panel, check the drain hose for any debris or blockages. If you find any blockages, remove them carefully using a pair of pliers or tweezers.

Step 5: Reassemble the Dishwasher

After you have checked and cleaned the drain pump and hose, it is time to reassemble the dishwasher. Start by reattaching the filter and twisting it clockwise to secure it in place. Next, replace the cover on the drain pump and secure it with the screws. Finally, replace the back panel and secure it with the screws.

Step 6: Test the Dishwasher

Once you have reassembled the dishwasher, it is time to test it to see if the E25 error has been resolved. Turn on the power to the dishwasher and run a cycle to see if the error code reappears. If the error code does not reappear, then you have successfully fixed the E25 error on your Bosch dishwasher.

Conclusion

Fixing the E25 error on your Bosch dishwasher is a simple process that can be done in a few easy steps. By following the instructions provided in this article, you can quickly and easily resolve the E25 error and get your dishwasher back to working order. Remember to always turn off the power to the dishwasher before working on it and to be careful when removing any blockages from the drain pump or hose.

With the above information sharing about bosch dishwasher e25 error reset on official and highly reliable information sites will help you get more information.