Instructions for Fixing Errors Error 0x8007017c

Introduction

Error 0x8007017c is a common error that occurs in Windows operating systems. This error is usually caused by a corrupted or damaged file system, which prevents the operating system from accessing the required files. The error can also be caused by a hardware failure, such as a failing hard drive or RAM. In this article, we will provide you with instructions on how to fix error 0x8007017c.

Step 1: Check for Hardware Issues

The first step in fixing error 0x8007017c is to check for any hardware issues. This error can be caused by a failing hard drive or RAM. To check for hardware issues, follow these steps:

Step 1.1: Check the Hard Drive

1. Press the Windows key + X and select “Device Manager”.
2. Expand the “Disk drives” category.
3. Right-click on your hard drive and select “Properties”.
4. Click on the “Tools” tab.
5. Click on “Check” under the “Error checking” section.
6. Follow the on-screen instructions to check your hard drive for errors.

Step 1.2: Check the RAM

1. Press the Windows key + X and select “Control Panel”.
2. Click on “System and Security”.
3. Click on “System”.
4. Click on “Advanced system settings”.
5. Click on the “Settings” button under the “Performance” section.
6. Click on the “Advanced” tab.
7. Click on the “Change” button under the “Virtual memory” section.
8. Uncheck the “Automatically manage paging file size for all drives” checkbox.
9. Select the drive where Windows is installed.
10. Select the “Custom size” radio button.
11. Set the “Initial size” and “Maximum size” to the same value (e.g. 4096 MB).
12. Click on the “Set” button.
13. Click on the “OK” button.
14. Restart your computer.

Step 2: Run the System File Checker

The System File Checker (SFC) is a built-in tool in Windows that scans for and repairs corrupted or damaged system files. To run the SFC, follow these steps:

1. Press the Windows key + X and select “Command Prompt (Admin)”.
2. Type “sfc /scannow” and press Enter.
3. Wait for the scan to complete.
4. Restart your computer.

Step 3: Run the DISM Tool

The Deployment Image Servicing and Management (DISM) tool is a built-in tool in Windows that repairs the Windows image. To run the DISM tool, follow these steps:

1. Press the Windows key + X and select “Command Prompt (Admin)”.
2. Type “DISM /Online /Cleanup-Image /RestoreHealth” and press Enter.
3. Wait for the scan to complete.
4. Restart your computer.

Step 4: Perform a Clean Boot

Performing a clean boot can help identify and fix software conflicts that may be causing error 0x8007017c. To perform a clean boot, follow these steps:

1. Press the Windows key + R and type “msconfig” and press Enter.
2. Click on the “Services” tab.
3. Check the “Hide all Microsoft services” checkbox.
4. Click on the “Disable all” button.
5. Click on the “Startup” tab.
6. Click on the “Open Task Manager” link.
7. Disable all startup items.
8. Close the Task Manager.
9. Click on the “OK” button.
10. Restart your computer.

Conclusion

Error 0x8007017c can be a frustrating error to deal with, but by following the steps outlined in this article, you should be able to fix the error and get your computer running smoothly again. Remember to always back up your important files before making any changes to your system. If you continue to experience issues, it may be best to seek the assistance of a professional.

With the above information sharing about error 0x8007017c on official and highly reliable information sites will help you get more information.