How to fix :f3 error code ge oven ?

Instructions for Fixing Errors F3 Error Code GE Oven


GE ovens are known for their durability and reliability. However, like any other appliance, they can develop faults over time. One of the most common errors that GE oven users encounter is the F3 error code. This error code indicates that there is a problem with the oven temperature sensor. In this article, we will provide you with step-by-step instructions on how to fix the F3 error code on your GE oven.

What is the F3 Error Code?

The F3 error code on a GE oven indicates that there is a problem with the oven temperature sensor. The temperature sensor is responsible for monitoring the temperature inside the oven and sending the information to the control board. If the temperature sensor is faulty, it can cause the oven to overheat or underheat, resulting in the F3 error code.

Step 1: Turn off the Power

Before you start fixing the F3 error code on your GE oven, you need to turn off the power. This is important to prevent any electrical shock or injury. Locate the circuit breaker that controls the power to your oven and turn it off.

Step 2: Remove the Temperature Sensor

The next step is to remove the temperature sensor from your GE oven. The temperature sensor is usually located at the back of the oven, near the top. You will need to remove the screws that hold the sensor in place and gently pull it out.

Step 3: Check the Temperature Sensor

Once you have removed the temperature sensor, you need to check it for any signs of damage or wear. Look for any cracks, breaks, or discoloration on the sensor. If you notice any of these signs, you will need to replace the temperature sensor.

Read more :  How to fix :nickel coin errors ?

Step 4: Test the Temperature Sensor

If the temperature sensor looks fine, you need to test it to make sure it is working properly. You can use a multimeter to test the resistance of the sensor. Set the multimeter to the ohms setting and touch the probes to the two terminals on the sensor. The resistance should be between 1000 and 1100 ohms at room temperature. If the resistance is outside this range, you will need to replace the temperature sensor.

Step 5: Replace the Temperature Sensor

If the temperature sensor is faulty, you will need to replace it. You can purchase a new temperature sensor from a GE authorized dealer or online. To replace the sensor, simply insert it into the hole where the old sensor was and secure it with the screws.

Step 6: Turn on the Power

Once you have replaced the temperature sensor, you can turn on the power to your GE oven. Test the oven to make sure the F3 error code has been resolved.


Fixing the F3 error code on your GE oven is a simple process that can be done in a few easy steps. By following the instructions provided in this article, you can quickly and easily fix the F3 error code and get your oven back to working properly. Remember to always turn off the power before working on any electrical appliance to prevent injury or damage.

You are looking : f3 error code ge oven

You can refer more 9 f3 error code ge oven below

2.GE Wall Oven F3 Error Code Explained – Appliance Repair Guides

  • Descriptions:
  • Website :

3.The F3 Error Code in a GE Electric Oven – Hunker

  • Descriptions: When “F3” error code flashes, a small part known as the oven temperature sensor has encountered an error and fails to work anymore. According to Repair Clinic, …
  • Website :

4.How to Fix GE Oven Error code: F3 – Prime HVAC & Appliance Repair

  • Descriptions:
  • Website :

5.What Does The F3 Error Code On My Ge Gas Oven Mean?

  • Descriptions: This error appears when there is a failure somewhere along the temperature sensor circuit. The sensor could be at fault or some part of the circuit could be …
  • Website :

6.How to Fix Code F3 on GE Oven – Fixya

  • Descriptions: Error F3 in your range/oven means oven temperature sensor circuit failure. To resolve this issue you’ll have to check the oven temp. sensor circuit if the …
  • Website :


  • Descriptions:
  • Website :

8.How To Fix Oven Displaying F3 Error Code – Kitchensnitches

  • Descriptions: When an oven from GE displays the F3 code, it usually means there’s something wrong with the oven sensor and it needs to be replaced. The problem can be caused …
  • Website : do I repair my GE Profile range with error code F3? – YouTube

  • Descriptions:
  • Website :

With the above information sharing about f3 error code ge oven on official and highly reliable information sites will help you get more information.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *