how to fix blown out speakers ?

How to Fix Blown Out Speakers – A Comprehensive Guide

How to Fix Blown Out Speakers – A Comprehensive Guide


Blown out speakers can be a frustrating experience for any music lover. It can happen due to various reasons such as overuse, high volume, or even a manufacturing defect. However, the good news is that you don’t have to replace your speakers every time they blow out. In this article, we will guide you through the process of fixing blown out speakers.

Identifying the Problem

The first step in fixing blown out speakers is to identify the problem. There are a few signs that indicate that your speakers are blown out. These include:

Distorted Sound

If you notice that the sound coming from your speakers is distorted or muffled, it could be a sign that your speakers are blown out. This is because the damaged speaker cone cannot produce clear sound.

No Sound

If you are not getting any sound from your speakers, it could be a sign that the voice coil or the wiring is damaged. This can happen due to overuse or high volume.

Crackling Sound

If you hear crackling or popping sounds coming from your speakers, it could be a sign that the speaker cone is damaged. This can happen due to overuse or exposure to moisture.

Fixing Blown Out Speakers

Once you have identified the problem, you can start fixing your blown out speakers. Here are some steps that you can follow:

Step 1: Remove the Speaker

The first step is to remove the blown out speaker from the cabinet. You can do this by unscrewing the screws that hold the speaker in place. Be careful not to damage the wiring while removing the speaker.

Read more :  How to fix :atm error codes list ?

Step 2: Inspect the Speaker

Once you have removed the speaker, inspect it for any visible damage. Check the speaker cone, voice coil, and wiring for any signs of damage. If you find any damage, you will need to replace the damaged parts.

Step 3: Repair the Speaker Cone

If the speaker cone is damaged, you can repair it using a speaker cone repair kit. These kits come with a special adhesive that can be used to fix the damaged cone. Follow the instructions on the kit carefully to ensure that the repair is done correctly.

Step 4: Replace the Voice Coil

If the voice coil is damaged, you will need to replace it. You can buy a replacement voice coil from a speaker repair shop or online. Follow the instructions carefully while replacing the voice coil to ensure that it is done correctly.

Step 5: Reassemble the Speaker

Once you have repaired or replaced the damaged parts, you can reassemble the speaker. Make sure that all the wiring is connected properly and that the screws are tightened securely.


Fixing blown out speakers is not as difficult as it may seem. With the right tools and knowledge, you can easily repair your speakers and enjoy your music once again. Remember to take care of your speakers to prevent them from blowing out in the future.

You are looking : how to fix blown out speakers

You can refer more 9 how to fix blown out speakers below

2.Blown Speaker: Sounds, Symptoms, & Fixes (Plus Guidance)

  • Descriptions:
  • Website :

3.How to Repair a Blown Speaker – YouTube

  • Descriptions:
  • Website :

4.How To Repair A Blown Speaker – YouTube

  • Descriptions:
  • Website :

5.How to Fix a Blown Speaker – Techwalla

  • Descriptions: If the cone of the speaker is punctured or torn you can use some tape or glue to repair the hole. If you are using glue you need to be sure the hole is …
  • Website :

6.How do you fix blown out car speakers? – Jerry Insurance

  • Descriptions: You can try fixing blown out car speakers by disconnecting the speaker and checking the voice coil, but you may need to repair a tear in the …
  • Website :

7.How To Fix A Blown Speaker | Nucoustics

  • Descriptions: Use Soft Silicone Rubber … Instead of using glue, you can also use silicone rubber. That is better than glue as it doesn’t dry rigidly. Speakers vibrate back …
  • Website :

8.Loudspeaker Blow-Out: Why It Happens & How To Avoid/Fix It

  • Descriptions: Replacing a fuse, if the speaker has one, is fairly simple. Remove the burned fuse from the fuse box and replace it with a fresh one. Many active speakers and …
  • Website :

9.How to Fix Blown Speakers | Fender Amps

  • Descriptions: The most common aural indication of a blown speaker is an unpleasant buzzing or scratching sound, by itself or roughly at the pitch of the note the speaker is …
  • Website :

With the above information sharing about how to fix blown out speakers on official and highly reliable information sites will help you get more information.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *