How to Fix Code U1412
Code U1412 is a diagnostic trouble code (DTC) that indicates a problem with the vehicle’s anti-lock brake system (ABS) module. This code is often accompanied by other ABS-related codes, such as U1408, U1417, and U1418. If you have a code U1412 on your vehicle, it’s important to address the issue as soon as possible to ensure safe driving conditions.
What is Code U1412?
Code U1412 is a communication error code that indicates a problem with the ABS module’s communication with the powertrain control module (PCM). The ABS module and PCM communicate through a network called the Controller Area Network (CAN). When the ABS module detects a communication error, it will set a code U1412 and illuminate the ABS warning light on the dashboard.
What Causes Code U1412?
There are several possible causes of code U1412, including:
Faulty ABS Module
The most common cause of code U1412 is a faulty ABS module. The module may have failed internally, or there may be a problem with the wiring or connectors that connect it to the CAN network.
Bad Wiring or Connectors
If there is a problem with the wiring or connectors that connect the ABS module to the CAN network, it can cause a communication error and set code U1412. This can be caused by corrosion, damage, or loose connections.
In rare cases, a failed PCM can cause code U1412. This is because the ABS module and PCM communicate through the CAN network, and if the PCM is not functioning properly, it can cause a communication error.
How to Fix Code U1412
The first step in fixing code U1412 is to diagnose the problem. This can be done using a diagnostic scanner that can read ABS codes. Once the problem has been identified, there are several steps you can take to fix it.
Check the Wiring and Connectors
The first step in fixing code U1412 is to check the wiring and connectors that connect the ABS module to the CAN network. Look for signs of corrosion, damage, or loose connections. If you find any issues, repair or replace the affected wiring or connectors.
Replace the ABS Module
If the wiring and connectors are in good condition, the next step is to replace the ABS module. This should only be done by a qualified technician, as it requires special tools and knowledge to properly install and program the new module.
Replace the PCM
If the ABS module and wiring are in good condition, and the problem persists, the PCM may be the cause of the communication error. In this case, the PCM will need to be replaced by a qualified technician.
Code U1412 is a communication error code that indicates a problem with the ABS module’s communication with the PCM. There are several possible causes of this code, including a faulty ABS module, bad wiring or connectors, or a failed PCM. If you have a code U1412 on your vehicle, it’s important to address the issue as soon as possible to ensure safe driving conditions. Diagnosing and fixing the problem may require the help of a qualified technician, so don’t hesitate to seek professional assistance if needed.
You are looking : how to fix code u1412
You can refer more 10 how to fix code u1412 below
- Descriptions: Faulty Transmission Control Module (TCM) · Transmission Control Module harness is open or shorted · Transmission Control Module circuit poor electrical connection.
- Website : https://www.engine-codes.com/u1412_dodge.html
- Website : https://www.youtube.com/watch%3Fv%3DuLYzYEDzT34
- Descriptions: Replace the ABS Module per Service Information. Perform the ABS VERIFICATION TEST. (Refer to 28 – DTC-Based Diagnostics/MODULE, Antilock Brake ( …
- Website : https://www.justanswer.com/chevy/bvw60-code-solve-code-u1412.html
- Website : https://www.reddit.com/r/Dodge/comments/vbhzmj/2015_dodge_journey_weird_code_u1412/
- Descriptions: DTC U1412: Implausible vehicle speed signal received · STEP 1. M.U.T.-III CAN bus diagnostics · STEP 2. Diagnostic trouble code recheck after resetting CAN bus …
- Website : https://mitsubishitechinfo.com/data/GS41/2009/42/HTML/M142961410003401USA.htm
- Website : https://www.chargerforumz.com/threads/fault-code-u1412.201257/
- Website : https://jeepadvices.com/u1412-code-jeep/
- Descriptions: Chrysler DTC U1412 · CAN C BUS OPEN OR SHORTED · NO POWER TO ANTI-LOCK BRAKE MODULE – MODULE UNPLUGGED OR OPEN FUSE · POWERTRAIN CONTROL MODULE (PCM).
- Website : https://www.dtcdecode.com/Chrysler/U1412
- Website : https://www.cumminsforum.com/threads/can-anyone-help-with-u1412-code.373614/
- Website : https://www.ramforum.com/threads/abs-light-brake-light-u1412-code.90996/
Leave a Reply