A common problem experienced by computer users who use floppy diskettes is diskette drive 0 seek failure. When this issue occurs, it can interfere with normal operation of the drive, which renders the drive unable to read or write data correctly. Here are some steps on how to fix diskette drive 0 seek failure.
Why is my diskette drive seek unsuccessful? What does diskette drive seek failure mean? What does diskette seek mean? What is boot failure? What is logical drive seek failure? If I put all these terms together, one can understand how diskette drive seek failure occurs.
First of all, let us see what diskettes is. Diskette is a type of hard drive that has the capability of storing data in the form of compact disks. Hard diskettes can be used for many purposes like recording audio and video as well as storing data. The best thing about floppy disc is that it is very cheap and can be easily replaced.
But, there are some limitations of floppy disc. When you try to run some program or when you try to access some data from your diskette drive, you will get this message “FDiskette is busy”. And if you try to run other program or if you try to access any data on that floppy disc, you will get this message “FDiskette is In Use”. And the worst thing is that sometimes even after so many times you try to access some data you will still get this message “FDiskette is In Use”. So, how to fix diskette drive 0 seek failure error?
In order to solve this problem, there are certain things you can do. The first and the most important thing that you have to do is to repair the physical damages. Physical damages means damages caused to the outer shell of the floppy disk drive. If you can replace the outer cover with a new one, it will make your life a lot easier because the drive is protected and is functioning properly again. However, if the damage cannot be repaired then the only thing you can do is to repair the logical damages.
The logical damages are those things that can cause Seek PD Failure. They are mostly caused by bad sectors on the disk. When the sector badness occurs, it can easily cause the Seek PD failure and can even damage the remaining parts of your hard disk. The most common sectors that can cause Seek PD failure is the boot sector, the file system, the secondary boot sectors and also the bootable files. The reason why the boot sector is the one that is causing Seek PD failure is because some of the programs and even the operating systems try to access the information about the start up and the function of your computer.
Actually, the Seek PD failure is also caused by the BIOS chips. These chips usually work by storing the boot messages, the configuration and other important data in your hard drive. If these chips somehow get corrupted, it can result to the Seek PD failure. Once your computer experiences Seek PD failure, you can easily determine if your computer is having this problem by looking at your BIOS chip.
If you want to know how to fix diskette drive 0 seek failure error by yourself, the first thing you need to do is to determine if your computer has already experienced the Seek PD failure. You have to open your laptop and make sure that the hard disk is not installed anymore inside it. By doing this, you will be able to see whether your computer already experiences this failure or not.
The next thing that you have to do is to use the F8 key when you boot your computer. By using the F8 key, you will be able to enter the boot menu which will help you detect the BIOS settings. By knowing the BIOS settings, you can already replace the existing boot entries with the new ones. After doing so, your computer should now boot successfully.
Why you get diskette drive 0 seek failure error on startup
Diskette drive 0 seek failure is caused by either an incorrect installation of drivers, or by the CD-ROM drive not being set to 0. If you are using a USB Flash Drive, the problem could be that you don’t have it set to boot in BIOS.
Diskette drive 0 seek failure is a common issue with computer startup. It’s a sign that the hard drive, which you need to boot the computer from, is not functioning. This is a more serious issue than just a dead floppy disk drive. You’ll need to order a new hard drive and install it before your system will be able to work.
The diskette drive 0 seek failure error can be fixed by trying to change the boot sequence, but this is often not possible. Users can also try using another computer.
How do I fix diskette drive 0 seek failure?
Disable Drive A in BIOS settings
The first step in fixing diskette drive 0 seek failure is to disable the drive in the BIOS settings. The BIOS settings are the computer’s firmware that communicates with the operating system. Make sure that you also save your BIOS settings before disabling any drives.
Step 1 : Restart your PC
Step 2 : Press the power button and immediately press F2 (or F10 in other PCs) to get into the BIOS setup
Step 3 : Scroll down to “Standard CMOS Features” and hit enter
Step 4 : Scroll down to highlight Drive A: You will see what is selected is something like 1.44, 3.5 in. Hit enter
Step 5 : Scroll up to select ‘None’ and hit enter
Step 6 : Press F10 to save changes and then Type ‘Y’ (yes) to accept the changes and press Enter to restart your PC. The error should now be gone.
Step 7 : For laptops, you can find the floppy disk in the ‘Main’ tab marked as ‘Legacy Diskette A:’ For other PCs, you can go to the ‘Drives’ link. Similar names to Drive A: include ‘Floppy Drive A:’ or ‘Legacy Diskette A:
Remove disks, discs, and drives
Diskette drive 0 seeks can be fixed by ensuring the diskette is properly seated in the drive. The manual should be consulted for specific instructions. How to fix diskette drive 0 seek failure Diskette drive 0 seeks can be fixed by ensuring the diskette is properly seated in the drive. The manual should be consulted for specific instructions.
Remove any CD or floppy from the computer to ensure that the computer isn’t booting non-bootable devices. Disconnect any USB devices, including external drives, except the keyboard and mouse. This should resolve your problem. Your computer tried to boot from an inoperable device.
Clean your floppy disk drive
There are a few things you can do if your floppy disk drive does not work anymore. One of the most common reasons for diskette drive failure is dirt and dust. Diskettes and diskette drives can become clogged and need to be cleaned. You can clean the head with a cotton swab and alcohol or with a lens cleaner.
Remove the metal plate covering the opening of the drive.
Replace your CMOS battery
PCs with a BIOS-based diskette drive can be problematic, as they might encounter a “seek failure.” This is due to the diskette drives being based on motors from the 1980s. In order to fix this issue, you need to replace the CMOS battery first. The battery might be old and not providing enough power to maintain a healthy flow of electricity.
You can follow the instructions below :
To expose the motherboard, open your computer. Some laptops may have a hatch that you can open to reveal the CMOS battery.
Buy a CMOS Battery from your local store. It should cost only a few dollars.
Remove the old battery from the socket and replace it with the new one. Replace only with the exact make, e.g. (CR2032). They can be purchased in local stores or online.