Instructions for Fixing Errors: Maytag Centennial Washer Error Codes

Introduction

Maytag Centennial washers are known for their durability and efficiency. However, like any other appliance, they can experience errors and malfunctions. One of the most common issues with Maytag Centennial washers is error codes. These codes can be frustrating, but they are designed to help you diagnose and fix the problem. In this article, we will provide you with instructions for fixing Maytag Centennial washer error codes.

Understanding Maytag Centennial Washer Error Codes

Maytag Centennial washers have a built-in diagnostic system that displays error codes when something goes wrong. These codes are displayed on the control panel and can help you identify the problem. Here are some of the most common Maytag Centennial washer error codes:

F1E1

This error code indicates a problem with the main control board. It could be caused by a faulty control board or a wiring issue.

F7E1

This error code indicates a problem with the motor circuit. It could be caused by a faulty motor, a wiring issue, or a problem with the motor control board.

F7E7

This error code indicates a problem with the motor speed sensor. It could be caused by a faulty sensor or a wiring issue.

F9E1

This error code indicates a problem with the long drain. It could be caused by a clogged drain hose, a faulty drain pump, or a problem with the pressure switch.

Fixing Maytag Centennial Washer Error Codes

Now that you understand the most common Maytag Centennial washer error codes, let’s discuss how to fix them.

F1E1

To fix this error code, you will need to replace the main control board. You can order a replacement board online or from a local appliance repair shop. Once you have the new board, follow these steps:

1. Unplug the washer from the electrical outlet.
2. Remove the screws that hold the control panel in place.
3. Disconnect the wiring harness from the old control board.
4. Remove the old control board and install the new one.
5. Reconnect the wiring harness and replace the control panel.
6. Plug the washer back in and test it to make sure the error code is gone.

F7E1

To fix this error code, you will need to check the motor circuit. Here are the steps:

1. Unplug the washer from the electrical outlet.
2. Remove the back panel of the washer.
3. Check the wiring connections between the motor and the motor control board.
4. If the connections are loose, tighten them.
5. If the connections are damaged, replace them.
6. If the wiring connections are fine, you may need to replace the motor or the motor control board.

F7E7

To fix this error code, you will need to check the motor speed sensor. Here are the steps:

1. Unplug the washer from the electrical outlet.
2. Remove the back panel of the washer.
3. Locate the motor speed sensor and check the wiring connections.
4. If the connections are loose, tighten them.
5. If the connections are damaged, replace them.
6. If the wiring connections are fine, you may need to replace the motor speed sensor.

F9E1

To fix this error code, you will need to check the long drain. Here are the steps:

1. Unplug the washer from the electrical outlet.
2. Remove the back panel of the washer.
3. Check the drain hose for clogs or kinks.
4. If the drain hose is clogged or kinked, clear the obstruction.
5. If the drain hose is clear, check the drain pump for obstructions.
6. If the drain pump is clear, check the pressure switch for problems.
7. If the pressure switch is faulty, replace it.

Conclusion

Maytag Centennial washer error codes can be frustrating, but they are designed to help you diagnose and fix the problem. By understanding the most common error codes and following the instructions we have provided, you can fix your Maytag Centennial washer and get it back to working properly. If you are unsure about any of the steps or need further assistance, don’t hesitate to contact a professional appliance repair technician.

With the above information sharing about maytag centennial washer error codes on official and highly reliable information sites will help you get more information.